<progress id="sxxrv"></progress>

  • <span id="sxxrv"><sup id="sxxrv"></sup></span><cite id="sxxrv"><li id="sxxrv"></li></cite>

      <track id="sxxrv"></track>

        <cite id="sxxrv"><li id="sxxrv"></li></cite>
      1. <track id="sxxrv"><i id="sxxrv"></i></track>

        1. Auto parts replacement points

          Source:Jinhua Haoxiang Auto Parts Co., Ltd.Publication time:2019-06-04

          Auto parts replacement points

          First, try to use the sealant, you can use the paint to achieve the ideal sealing effect;

          Second, the rubber seal should be carefully checked for appearance quality before assembly; use special tools to press fit to avoid knocking deformation;

          3. Fill the lubricating grease according to the regulations, and regularly clean the venting holes and check valves;

          4. Assembling in extremely clean conditions, the working surface of the parts is free from bumps, scratches, burrs and other attachments;

          5. Strict operation procedures, the seals should be properly installed to prevent deformation in place;

          6. Master the performance specifications and use requirements of the seals and replace the failed parts in time;

          7. For side-wall thin-walled parts, use sheet metal cold for correction; shaft hole parts that are easy to wear can be metallized, welded, glued, machined, etc. to achieve the original size;

          Eighth, the nut slide wire is broken and loose, and new parts should be replaced and screwed to the specified torque.